2D measurement services

Level 2 bespoke measurement service
Upto 20 individual measurements
Certificate returned

In stock
EU €150.00


This service provides a bespoke one-off measurement of your flat 2D part. It is a bespoke service, which means that you decide what areas need measuring, how many distances, and what pass or fail tolerances you require. The price is for upto a maximum of 20 defined positions or features, but becasue this is a bespoke service we will need to quote individually depending upon the materials supplied. Once measured, a full C-of-C will be issued .

All dimensional measurements are taken in controlled environmental conditions of 21deg C (+/- 1 Deg)  and 50% humidity (+/- 5%), using an OGP ZIP 300 at 400 x magnifications. All feature-size measurements smaller than 200um will be measured on a Nikon MM40 with magnifications between 50x - 960x depending upon the requirements.

NIST Level 2 Certificate

We issue this service as a Level 2 NIST standard: "A calibration, which may be carried out in-house, performed to a documented method by competent staff, using appropriate reference standards/equipment. The reference standards/equipment will need to be calibrated by a laboratory that can demonstrate competence, measurement capability and traceability, e.g. a UKAS accredited calibration laboratory."

The environmental conditions are recorded on the certificate, to enable sizes and dimensions to be extrapolated back to know conditions.



Dimensional:   A series of dimensional measurements are taken on the film, related back to a given origin point. Dimensions are taken in X, Y and diagonal to allow you to confirm the overall scale and squareness of your product.

Feature Sizes:   In addition to the dimensional process described above, we can also measure features by finding the CD (critical dimension) of the parts that need inspecting. Not only do we record the sizes of features, but we also take a digital photo that is saved with the inspection log. 

Please see the TECHNICAL sections, DOWNLOAD sections and FAQ for further information. If you still require clarification, pleas either email or click for LIVE SUPPORT.


This is a bespoke service, so specifications will change from order to order.


Please supply us with a full document/drawing showing the required dimensions that need measureing, along with the tolerances that allow a pass/fail. All measurements will be shown on the returned CofC.




Q: How accurate are the features, what tolerances do you work to ? 

A: This is dependant upon the resolution that we image the mask at. The QUICK REFERENCE brochure in the DOWNLOADS section will give you a chart, specifying both feature and dimensional tolerances.