Film Processor NG110

Colenta Film Processor
Film Processing Width = 1100mm
NGs-110 processor

In stock
US $0.00

Colenta Film Processors

The Colenta IL-PCB Film processor range is a fully automatic “dry to dry” processing system designed for reliable processing of all types of common used PCB films.

The processor incorporates a non opposed roller transport system, which has been produced to ensure minimal contact with the film emulsion, and has a series of intermediate wash water crossovers which safely transfer the film between each stage of processing. This produces high quality PCB images, requiring the minimum of operator involvement.

Our Colenta PCB film processors are well established with a proven reputation for quality production, reliable performance and long life operation.


   Upgradeable to suit your needs....

   When required, a deeper tank rack set can be installed (at customer site) to provide higher processing capacity.


   Ergonomic design to ensure clean housekeeping....

   Slide-out tray for easy access to the replenishment & waste containers.


   Quality racks and rollers to provide long life processing.....

   The centre track rollers have minimal contact with the film emulsion.



  • Removable flat feed table
  • Touch Free detection and area measurement of all material entering the processor
  • Film area based precise replenishment of all chemical solutions
  • Low level monitoring in all processing tank solutions
  • Filter Change Alert.
  • Automatic Standby and energy saving modes
  • Prepared for connection to an external exhaust air facility
  • Integrated Replenishment storage tanks with level control
  • upgradable on site for higher processing capacity




To ensure consistent quality and accuracy,
We recomend to use Agfa Films and Chemistry.




Technical Specifications


  • Processing applications: all common used PCB film in sheet format

  • Film thickness : 4mil / 7mil

  • Max. Process: IL 110 PCB.... 110cm / 43inch

  • Processing capacity : TypeNGs 125cm/min (40inch/min) at 30 sec DevTime

  • Microprocessor Control : with 9 preprogrammable processing cycles

  • Replenishment: - Precisely controlled using opto-sensors to measure the film area loading.
    - Activated after a pre-programmed film area is fed into the processor
    - Antioxidation/standby replenishment, activated after 0-9 hours

  • Range: preprogrammable from 10 to 2000ml per SQM

  • Solution Levels: Low Level monitoring in all processing tanks
    High Level monitoring in Overflow Collection Tanks (waste management, optional)
    Low Level in Repl. Tanks for Developer and Fixer

  • Temperatures: High / Low level monitoring for all the wet-tanks
    (a cold water cooling system is in place for the DEV & BLEACH

  • Range: preprogrammable from 18 to 43°C for DEV and BLEACH
    preprogrammable from 25 to 55°C for DRY

  • Work in Progress : Details the location of film within the processor.

  • Transport: Drive motor overload monitoring


Please see the TECHNICAL sections, DOWNLOAD sections and FAQ for further information. If you still require clarification, please either email or click for LIVE SUPPORT.